|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
Tools Needed:
Parts Supplied: 1. Remove the pole from the ground sleeve. 2. Remove the two end cap mounting screws near the bottom of the pole. 3. Remove the end cap using pliers to hold the rib in the center of the cap. 4. Align the slot in the end cap with the rib in the tube, and slide the new end cap into the tube. 5. Align the screw holes in the end cap with the screw holes in the flagpole and install the two mounting screws. 6. Test the flagpole for proper operation. |
|
| Owner's Corner Main Menu |
| | Awning Home Page |
| | Flagpole Home Page |
| | Contact Us |
|
Copyright © 2010 SunSetter Products,
a Massachusetts Limited Partnership. All rights reserved. All trademarks are owned by SunSetter Products. |
For technical support please |
|
|
