|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
Tools Needed:
Parts Supplied: 1. Remove the clip from the bottom swivel. 2. Note the orientation of the swivel. The flat side is up and the curved side is down. 3. Spread the loops and pull the old bottom swivel away from the flagpole. 4. Orient the new bottom swivel the same as the old bottom swivel. 5. Spread the loops of the new bottom swivel and slide it over the flagpole. 6. Reinstall the clip removed in step 1. 7. Test the flagpole for proper operation. |
|
| Owner's Corner Main Menu |
| | Awning Home Page |
| | Flagpole Home Page |
| | Contact Us |
|
Copyright © 2010 SunSetter Products,
a Massachusetts Limited Partnership. All rights reserved. All trademarks are owned by SunSetter Products. |
For technical support please |
|
|
