|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
Tools Needed:
Parts Supplied: 1. Remove the top section of the pole by holding in the button while extending the section upwards and sliding it out of pole #2 2. Remove the gold ball by loosening the gold nut and unscrewing the gold ball. Remove the flag(s) and flag clips from the swivels. 3. Install the gold ball onto the new pole section. 4. Align the slot in the bottom cap of tube #1 with the track inside of tube #2. 5. Lower the top section into tube #2 while holding in the button in tube #1. 6. Reinstall the flag(s) with the flag clips. 7. Test the flagpole for proper operation. |
|
| Owner's Corner Main Menu |
| | Awning Home Page |
| | Flagpole Home Page |
| | Contact Us |
|
Copyright © 2010 SunSetter Products,
a Massachusetts Limited Partnership. All rights reserved. All trademarks are owned by SunSetter Products. |
For technical support please |
|
|
