|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
|
|
|
|
|
| SunSetter Flagpoles Technical Support |
|
Tools Needed:
Parts Supplied: 1. Remove the two top sections of the pole by first lifting tube #2 until the button locks. Next, depress the button and extend tube #2 completely out of tube #3. 2. Remove the bottom cap mounting screws and remove the bottom cap. 3. Align the slot in the new bottom cap with the track inside the tube and slide the new bottom cap into the tube. 4. Install the two bottom cap mounting screws. 5. Place the two top tubes back into tube #3. Lower them slowly until the button pops out of the hole in tube #3. Be sure to line up the slot in the bottom cap with the track on the inside of the tube. 6. Test the flagpole for proper operation. |
|
| Owner's Corner Main Menu |
| | Awning Home Page |
| | Flagpole Home Page |
| | Contact Us |
|
Copyright © 2010 SunSetter Products,
a Massachusetts Limited Partnership. All rights reserved. All trademarks are owned by SunSetter Products. |
For technical support please |
|
|
